Laundry with Harvested Rainwater in Wyoming

Using harvested rainwater for laundry in Wyoming is a practical way to reduce your water bill and conserve municipal supplies. With 12.9 inches of average annual rainfall, a 1,500-square-foot asphalt shingle roof in Wyoming can collect approximately 8,748 gal per year. laundry requires roughly 15 gallons per day per person, year-round. With this setup, rainwater can meet approximately 79.9% of your laundry needs, saving an estimated $43.74 per year.

Annual Harvest 8,748 gal 1,500 sq ft roof
Annual Demand 10,950 gal laundry (2 people)
Demand Met 79.9% of laundry
Rec. Tank 1,000 gal storage capacity

Monthly Supply vs. Demand for Laundry in Wyoming

The table below shows how your monthly rainwater harvest compares to laundry demand throughout the year. Green values indicate months where your harvest exceeds demand (surplus water for tank storage), while red values show months where you will draw down your stored reserves. Laundry is a year-round use, so demand remains constant regardless of season. Tank sizing should bridge the gap during your driest months.

Month Harvest (gal) Demand (gal) Balance
January 299 930 -631
February 299 840 -541
March 598 930 -332
April 1,047 900 +147
May 1,495 930 +565
June 1,196 900 +296
July 897 930 -33
August 673 930 -257
September 748 900 -152
October 673 930 -257
November 449 900 -451
December 374 930 -556

Harvest by Roof Size for Laundry

A larger roof collection area directly increases your harvest and the percentage of laundry demand you can meet with rainwater. The table below shows how different roof sizes perform in Wyoming for laundry (calculated for 2 people).

Roof Area Annual Harvest Demand Met Rec. Tank Savings/Year
1,000 sq ft 5,831 gal 53.3% 100 gal $29.16
1,500 sq ft 8,748 gal 79.9% 1,000 gal $43.74
2,000 sq ft 11,663 gal 100.0% 1,500 gal $54.75
2,500 sq ft 14,577 gal 100.0% 2,500 gal $54.75

Setting Up Rainwater Harvesting for Laundry in Wyoming

Using rainwater for laundry in Wyoming offers a unique benefit: rainwater is naturally soft, meaning you can use 30-50% less detergent while achieving the same or better cleaning results. Hard municipal water requires more soap to lather effectively, and mineral deposits can make fabrics stiff and dull over time. A rainwater-fed laundry system requires the same setup as toilet flushing — dedicated non-potable plumbing, a pump-and-pressure system, and sediment plus carbon filtration to remove any debris or tannins that could discolor fabrics. The filtration requirements are slightly higher than for toilet use because you want to protect both your clothing and your washing machine from fine sediment. A first-flush diverter on your collection system is especially important for laundry use to keep water clean.

Metal Roof Upgrade: Laundry in Wyoming

Upgrading to a metal roof increases your collection efficiency from 80% (asphalt shingle) to 95%, boosting your annual harvest to 10,387 gal from a 1,500-square-foot roof. This increases your laundry demand coverage to 94.9% and raises annual savings to $51.94. Metal roofs also last 40-70 years compared to 20-30 years for asphalt shingle, and their smooth surface sheds debris more effectively, reducing maintenance on your collection system and improving water quality.

Other Uses for Rainwater in Wyoming

Explore how harvested rainwater can serve other needs in Wyoming:

Get Your Custom Estimate

Use our Rainwater Harvesting Calculator to enter your exact roof area, material, and combine multiple uses for a comprehensive harvest analysis. See all rainwater harvesting data for Wyoming or compare all 50 states.