Laundry with Harvested Rainwater in Indiana

Using harvested rainwater for laundry in Indiana is a practical way to reduce your water bill and conserve municipal supplies. With 42.4 inches of average annual rainfall, a 1,500-square-foot asphalt shingle roof in Indiana can collect approximately 31,323 gal per year. laundry requires roughly 15 gallons per day per person, year-round. With this setup, rainwater can meet approximately 100.0% of your laundry needs, saving an estimated $43.80 per year.

Annual Harvest 31,323 gal 1,500 sq ft roof
Annual Demand 10,950 gal laundry (2 people)
Demand Met 100.0% of laundry
Rec. Tank 2,500 gal storage capacity

Monthly Supply vs. Demand for Laundry in Indiana

The table below shows how your monthly rainwater harvest compares to laundry demand throughout the year. Green values indicate months where your harvest exceeds demand (surplus water for tank storage), while red values show months where you will draw down your stored reserves. Laundry is a year-round use, so demand remains constant regardless of season. Tank sizing should bridge the gap during your driest months.

Month Harvest (gal) Demand (gal) Balance
January 1,944 930 +1,014
February 1,794 840 +954
March 2,542 930 +1,612
April 2,841 900 +1,941
May 3,364 930 +2,434
June 3,140 900 +2,240
July 2,990 930 +2,060
August 2,691 930 +1,761
September 2,392 900 +1,492
October 2,392 930 +1,462
November 2,691 900 +1,791
December 2,542 930 +1,612

Harvest by Roof Size for Laundry

A larger roof collection area directly increases your harvest and the percentage of laundry demand you can meet with rainwater. The table below shows how different roof sizes perform in Indiana for laundry (calculated for 2 people).

Roof Area Annual Harvest Demand Met Rec. Tank Savings/Year
1,000 sq ft 20,884 gal 100.0% 1,500 gal $43.80
1,500 sq ft 31,323 gal 100.0% 2,500 gal $43.80
2,000 sq ft 41,766 gal 100.0% 5,000 gal $43.80
2,500 sq ft 52,207 gal 100.0% 5,000 gal $43.80

Setting Up Rainwater Harvesting for Laundry in Indiana

Using rainwater for laundry in Indiana offers a unique benefit: rainwater is naturally soft, meaning you can use 30-50% less detergent while achieving the same or better cleaning results. Hard municipal water requires more soap to lather effectively, and mineral deposits can make fabrics stiff and dull over time. A rainwater-fed laundry system requires the same setup as toilet flushing — dedicated non-potable plumbing, a pump-and-pressure system, and sediment plus carbon filtration to remove any debris or tannins that could discolor fabrics. The filtration requirements are slightly higher than for toilet use because you want to protect both your clothing and your washing machine from fine sediment. A first-flush diverter on your collection system is especially important for laundry use to keep water clean.

Metal Roof Upgrade: Laundry in Indiana

Upgrading to a metal roof increases your collection efficiency from 80% (asphalt shingle) to 95%, boosting your annual harvest to 37,198 gal from a 1,500-square-foot roof. This increases your laundry demand coverage to 100.0% and raises annual savings to $43.80. Metal roofs also last 40-70 years compared to 20-30 years for asphalt shingle, and their smooth surface sheds debris more effectively, reducing maintenance on your collection system and improving water quality.

Other Uses for Rainwater in Indiana

Explore how harvested rainwater can serve other needs in Indiana:

Get Your Custom Estimate

Use our Rainwater Harvesting Calculator to enter your exact roof area, material, and combine multiple uses for a comprehensive harvest analysis. See all rainwater harvesting data for Indiana or compare all 50 states.